I was driving a GT2 car and an annoying problem has surfaced after this patch. When I spin, the car stalls. But not only does it stall after the initial spin, but when I intentionally spin the car around to face the proper direction it stalls again. When I engage a gear it stalls again and switches back to neutral OVER AND OVER AND OVER I hope this wasn't added in the patch for realism - nothing fun or realistic about that at all.
Sounds like clutch. Either use yours or turn auto clutch on. A real car will stall in gear with not enough revs.
Get real mode? Did you check the car setup? Cause I think the GT2 cars have some TC enabled by default, so lower the value for TC step 1 to 0 and see if that helps.
Thanks guys. Yes, it turned out to be the auto clutch was off. Wow was it frustrating since I don't have a clutch pedal. (DFGT) Now i can't get the position bar to turn on. I turned it off to try and make a video, but now it won't turn back on. position bar setting is "on" in initial settings. Tried pressing the key that turns position bar on/off. Tried re-mapping the key
Beware that there is actually two places for position bar settings: - in the "HUD settings" sub-menu, inside the option menu. - in the "main race screen" (the one you have when you're just ready to get on track, with "Drive" "Car Setup", etc, where there is on the lower right a position bar "slider" : Off/Names Only/Positions and Names" I think both have to be "turned on" for the position bar to be displayed (but don't quote me on this)