Telemetry RST Telemetry App by RacingSimTools

Discussion in 'Community Workshop' started by Zeraxx, Aug 21, 2019.

  1. Zeraxx

    Zeraxx Active Member

    Joined:
    Aug 21, 2019
    Ratings:
    +41 / 0 / -0
    Another video where we show you guys how you can use the software to gain insights about the setup! In this video we take a look at the GT3 Huracan.
     
    • Like Like x 1
    • Informative Informative x 1
  2. Zeraxx

    Zeraxx Active Member

    Joined:
    Aug 21, 2019
    Ratings:
    +41 / 0 / -0
    The manual has been updated for V1.0.23.

    The following changes are included:

    1) Updated chapter 1.3.1 (iRacing car parameters) with a new method to estimate tire diameters.
    2) Updated chapter 3.4 (Gearing) to include the power band guidelines.
    3) Updated chapter 3.7 (Track) to include the new track map modes and comparison functionality
    4) Various typo and grammar fixes


    You can download it via the "Help" button in the app or from the following link:
    https://drive.google.com/open?id=1Y4...BG3Asz8aGPQ1V_
     
    • Like Like x 1
  3. Zeraxx

    Zeraxx Active Member

    Joined:
    Aug 21, 2019
    Ratings:
    +41 / 0 / -0
    PUBLIC RELEASE 1.0.28

    - Fixed issue where returning to the pits via the pause menu in Project Cars 2 would cause outlap data and flying lap data to be merged into the same lap if your pit box was placed after the start/finish line.
    - Fixed issue where Next Session Car Params were not properly saving some damper parameters entered by the user.
    - Added safeguards to try to keep RST Software from creating several new sessions while the user is driving if they are missing UDP packets due to network environment issues.
    - Fixed Air Density Data Label to show [kg/m³] instead of [C].
    - Fixed Autoscale on the Camber Temp Graph.
     
    • Like Like x 1
  4. Jacob Marshall

    Jacob Marshall Member

    Joined:
    Nov 3, 2019
    Ratings:
    +12 / 0 / -0
    Is this an 'online only' app or can it be run offline/local?
     
  5. Zeraxx

    Zeraxx Active Member

    Joined:
    Aug 21, 2019
    Ratings:
    +41 / 0 / -0
    Not currently, at the moment the only thing the application needs to be online is to check your license. We'll try to brainstorm a way we can validate users accounts that doesn't require a license check.
     
    • Like Like x 1
  6. Zeraxx

    Zeraxx Active Member

    Joined:
    Aug 21, 2019
    Ratings:
    +41 / 0 / -0
    PUBLIC RELEASE 1.0.31
    -Revamped all graphs to now include the ability to select x-axis as Time or as Distance.
    -Added an additional "Comparison View" for damper histograms which makes it easier to compare and analyze symmetry.
    -Fixed PC2 Lap Logic issues with skipping sessions offline and some online sessions not recording.
    -Added option to Preferences window to allow iRacing users to choose default file extension for open dialog (.ibt/.lap)
    -Added a "Calculated" Ride Height data channel for F1 2019.
    -PC2 Car Selection Drop Down is now hidden when other sims are selected.
    -Users can no longer open "Next Session Car Params" when no game is selected.
    -Added options for the user to select a default directory for saving/ loading .car and .lap files
    -Added a packet density metric, this is located in the bottom right of the UI and will tell you what your sample rate is.
    Damper Histogram Alt.PNG
     
    • Like Like x 1
  7. Zeraxx

    Zeraxx Active Member

    Joined:
    Aug 21, 2019
    Ratings:
    +41 / 0 / -0
    PUBLIC RELEASE 1.0.39
    Bug Fixes:
    1) Fixed the distance vs time scroll issue when changing tabs
    2) Fixed the distance vs time on Driver Tab
    3) Other games show ARB + Damper + Spring on total wheel load labels.

    New Functionality:
    1) Added Aero Efficiency tab
    2) Added total downforce data label to "Downforce Tab"
    3) Added Camber Temp and Pressure Temp run graphs to "Camber/Pressure Temps" under Run.
    4) Added fuel capacity vs lap time named "Fuel Time" under run.
    5) Added fuel calculator to "Fuel" Run tab.
    6) Added a fuel burn rate data label (takes linear regression of data).
    7) Added Average Power per gear metrics to Gearing tab

    [​IMG]
     
  8. NL-Jos

    NL-Jos Well-Known Member

    Joined:
    Jun 5, 2015
    Ratings:
    +184 / 0 / -0
    Is it possible that the program saves the username and password?
    Every time after an update i need to enter it again
     
    • Like Like x 1
  9. Zeraxx

    Zeraxx Active Member

    Joined:
    Aug 21, 2019
    Ratings:
    +41 / 0 / -0
    We added that in the newest update. When we launch another update you shouldn’t need to login again.
     
    • Like Like x 2
  10. Zeraxx

    Zeraxx Active Member

    Joined:
    Aug 21, 2019
    Ratings:
    +41 / 0 / -0
    HUGE update in the works, but for now enjoy a video showing you how you can use RST for driver development.
     
    • Like Like x 1
  11. Zeraxx

    Zeraxx Active Member

    Joined:
    Aug 21, 2019
    Ratings:
    +41 / 0 / -0
    PUBLIC RELEASE 1.0.42

    1) RST now offers a Telemetry Dash which will be available to purchase in the upcoming weeks. More information about this dash will be posted on our website and discord.
    2) Added RST Hotkeys, you can now program buttons from a controller or keyboard to select a new lap, scroll through the data, etc.
    3) Added the ability to scroll the graphs by dragging on the graphs themselves.
    4) iRacing IBT's can now be automatically imported, a listener will be created in your iRacing Directory. To enable this option, go to the preferences tab.
    5) iRacing can now read split up IBTs from VRS.
    6) ACC now has a dropdown list of carparams like Pcars2.
    7) Added the Dirt Rally 2.0 License.
    8) Added the ability to define wheel slip % thresholds for the LED indicators on the dash.
     
    • Like Like x 2
  12. Zeraxx

    Zeraxx Active Member

    Joined:
    Aug 21, 2019
    Ratings:
    +41 / 0 / -0
    PUBLIC RELEASE 1.0.44

    Bug Fixes:
    1) Fixed issue where Car Params would always default to non-symmetric.
    New Features:
    1) Added AMS2 License.
    2) Started the first phase of performance enhancements, you should notice a difference in graph loading speed.
     
    • Like Like x 1
  13. Zeraxx

    Zeraxx Active Member

    Joined:
    Aug 21, 2019
    Ratings:
    +41 / 0 / -0
    PUBLIC RELEASE 1.1.6

    New Features:
    1. Changed the scroll behavior of the graphs, you can now click or drag on the graphs and the cursor will snap to the mouses position.
    2. Changed the Car Params input behavior, if symmetric is selected, the "Right Hand" params will be disabled.
    3. Changed the Car Params tab order.
     
    • Like Like x 1
  14. Darrel Kruger

    Darrel Kruger New Member

    Joined:
    May 8, 2020
    Ratings:
    +1 / 0 / -0
    OK, I'd like to get this RST telem running. I dl'd it and installed.
    I am running R3E at sonoma, nissan 95 gto car. done several laps.

    Can't find the logs nor figure out how to turn RST on. Any help please!
     
  15. Newton Prado

    Newton Prado New Member

    Joined:
    Jun 24, 2019
    Ratings:
    +1 / 0 / -0
    There's no demo mode
     
  16. Zeraxx

    Zeraxx Active Member

    Joined:
    Aug 21, 2019
    Ratings:
    +41 / 0 / -0
    Its that time again!!! RST is excited to announce version 2.1.0 which includes the updates below

    IMPORTANT!!!! I found the issue with the last update and the auto updater that was causing a lot of you issues, and required you to delete your autologin.txt, I resolved it in this build however you will need to manually uninstall and reinstall the application again, going forward you will receive automatic updates without any issues......I promise =P

    To download the new update:
    1) Go to your control panel > Add and Remove Programs.
    2) Find "RST Software" and then click uninstall, wait for the program to uninstall.
    3) Then, go to RacingSimTools.com and click on the download button or just hit this link https://pc2tuner.blob.core.windows.net/rst-software-installer/RST Installer.exe
    4) Run the Setup.exe, and install the app using the wizard.
    5) Open the app the first time as an admin, (you will not need to do this going forward).

    After following the steps above you should have the new version of RST and will receive automatic updates in the future. If you have any issues or questions please let us know in the #bug-reporting channel.

    RELEASE 2.1.0
    New Features:

    1) If you deselect a "sel lap" the data is now removed from the graphs.
    2) Added Smoothing function to timeslip.
    3) Updated the Splashscreen.
    4) Set Min Axis values on Gearing graphs to 0.
    5) Set Min Axis values on Temp Graphs (except track/ambient temp) to 0
    6) Set Min Axis values on Run Graphs to 0.
    7) Set Min Axis values on various Drivers Graphs to 0.
    8) Added Startup Auto Game Selection.
    9) Added styling to various graphs to highlight the zero line.
    10) Constrained the graphs to the size of the data, now you can only zoom so far that out that the data fits the graph and no more.
    11) Added Scrollbar indicator at the bottom, this shows you how far zoomed in you are and where in the data you are currently viewing.

    Bug Fixes:
    1) Car Params Screen crash.
    2) Fixed issue where Optimal Tire Temp Run Chart wasn't diplaying correctly.
    3) Fixed issue where Fuel vs. Time Run Chart wasn't diplaying correctly.
    4) Fixed issue where Understeer Angle Run Chartwasn't diplaying correctly.
    5) Fixed issue where Damper Histos Zero Node wasn't showing a value.
    6) Fixed issue where F1 2019 was updating the car params incorrectly.
    7) Fixed AutoUpdate.
    8) Changed Min Value of Speed Graph for Throtlte Acceptance Driver Tab.
    9) Car Params Screen crash.
    10) Fixed issue with Zero Node not updating sometimes.
    11) Fixed issue with datalabels not updating if the first lap was selected.
    12) Fixed issue where Braking line sometimes woudln't graph on "DrivingLine" if no other graphs had been viewed first.
    13) Changed Scrollbar color to be more visible when selected.
    14) Changed the layout of the Session Label so long session names don't push the session edit buttoins off screen. 15) Fixed issue where car position and labels wouldn't update when moving the cursor if only 1 lap was loaded. 16) Added more criteria for the ACC Lap Logic to improve lap detection in hotlap.
     
    • Like Like x 2
  17. Michael L

    Michael L Member

    Joined:
    Jan 26, 2021
    Ratings:
    +8 / 0 / -0
    Is there a demo I can try? Is the price per game or for all games? Thanks.
     
  18. RWB Charger

    RWB Charger Well-Known Member

    Joined:
    Nov 26, 2018
    Ratings:
    +99 / 0 / -0
  19. Michael L

    Michael L Member

    Joined:
    Jan 26, 2021
    Ratings:
    +8 / 0 / -0
    Got it thanks.
     
  20. Zeraxx

    Zeraxx Active Member

    Joined:
    Aug 21, 2019
    Ratings:
    +41 / 0 / -0
    PRODUCTION RELEASE 2.2.0


    New Features:

    1) Ability to select as many laps as you want (Be weary huge performance hit the more laps you try to render)

    2) Added the Sidebar that dynamically adds/removes data based on what is selected in the lap tree.

    3) Backend changes (nearly entire rewrite of the app)

    1) Added GT4 and 2020 GT3 cars to the ACC Car Param Dropdown.

    2) Removed Damper Histogram Margins

    3) Updated the Car Param UI

    4) Updated Time Slip Messages on Driver graphs

    5) Added the ability to hold down the car params increment buttons.

    6) Changed the full screen behavior so it does not hide the task bar.

    7) Added some buttons on each page to zoom the graph either in x, y, or x and y at same time. These zooming functions are also key binds.

    8) Added Error Logging to RST. The error log will save to the main directory you have RST installed at and is called error.txt

    9) Driver toggle, this new toggle will auto uncheck the last lap and check the recently completed lap in RST, this is a feature that is nice if you have RST on a second screen and your trying to improve yourself in a specific corner and have a baseline lap selected.

    10) Changed the autologin.txt file location to be in the app data folder, we are hoping this gets around the need for RST to be started as admin every update.

    11) RST now points to an enterprise server. The old server will remain online for another 3 weeks so everyone can transition to the new version of RST, at that time it will be shutdown.


    Bug Fixes:

    1) General Performance improvements in the backend

    2) Fixed issue that would cause the application to crash in AMS2 when "skipping to the next session"

    3) Fixed display issue with car params.

    4) Fixed issue where sometimes the symmetric tick box in car params would still allow users to edit each option.

    5) Fixed issue that would prevent RST from reading F1 2019 data.

    6) Changed the color list to help with colors that were too close to one another.

    7) Various stability improvements


    upload_2021-5-9_8-57-8.png
     
    • Like Like x 1